Shimo Fingerprint - Surface-mounted safe with electronic lock and fingerprint reader, 8mm front and motorized opening.

• Made of steel with an 8 mm thick front and 3 mm body.
• The front and door are flat, without a gap for inserting a lever (manufactured by laser cutting).
• Locking system with 2 nickel-plated steel bolts, 25 mm in diameter.
• With internal LED light, convenient and low consumption, which activates and deactivates when opening and closing the safe.
• With interior shelf, removable if not needed, in models 620820, 620840, and 620850.

• Electronic lock with fingerprint reader and motorized opening. Once the reader scans a registered fingerprint, the safe opens automatically.
• Registers and memorizes up to 29 different fingerprints.
• With a green LED light on the fingerprint reader to assist in using the safe.
• With protection lock: temporarily locks after entering 5 incorrect fingerprints.

• Powered by 4 AA 1.5V alkaline batteries (not included).
• Low battery warning by flashing the green LED light on the reader.

• Has an additional lock for emergency key opening (supplied) to open the safe in case of dead batteries or fingerprint reader failure.
• Also has an external micro USB power outlet for connecting the battery adapter (supplied) or any other external battery. In case of dead batteries, it can also be used to activate the fingerprint reader, open the safe, and change the batteries.

Measurements in height x width x depth:

• 620810 | 20x31x20 cm (exterior) | 19.4x30.4x17.8 cm (interior) | 10.5 kg weight | 10.5 L capacity.
• 620820 | 25x35x25 cm (exterior) | 24.4x34.4x22.8 cm (interior) | 14.8 kg weight | 19 L capacity.
• 620840 | 27x38.5x30 cm (exterior) | 26.4x37.9x27.8 cm (interior) | 19.4 kg weight | 28 L capacity.
• 620850 | 30x38x30 cm (exterior) | 29.4x37.4x27.8 cm (interior) | 20.4 kg weight | 31 L capacity.

No construction needed for installation, but it is recommended to secure it to reduce the risk of theft. It has pre-drilled holes to attach the safe to the wall, a shelf, or the floor. There are 2 holes in the base and 2 in the back. Mounting screws are included.

The package includes the safe, the instruction manual, 2 emergency keys, and the external adapter with micro USB connector.

Emergency key model 62-LLE.

Each safe has a unique serial number engraved, so duplicates of keys can be requested in case of loss.

ARREGUI has a specialized Technical Assistance Service network throughout the national territory for any incident related to your ARREGUI safe.